Figure 5. P/N 298168-1 Spanner Wrench

TB 1-1520-238-30-19

CAUTION

Ensure locking mechanism on nut (16) is fully released prior to re-

moval of nut (16) from splined output adapter (19).

NOTE

Apply direct pressure downward onto spanner wrench during removal of nut

(16).

7.12 Using spanner wrench (P/N 298168-1, Figure 5) remove nut (16) from splined output adapter (19) and

discard nut.

Figure 5. P/N 298168-1 Spanner Wrench

7.13 Remove six bolts (21) - retain for reinstallation.

NOTE

Using Arbor Press Position parts, along with proper tooling, onto base of

arbor press. Align parts and carefully apply pressure to tooling to start re-

moval process. When alignment is assured, press part to separate.

7.14 Place output housing assembly (11) on holding fixture (P/N 296844-1, Figure 2) with the bolt side

against the holding fixture. Make sure output housing assembly is centered in holding fixture. Using arbor

press and press tool (P/N 298530-5, Figure 6), press the splined output adapter (19) through the rotating

flange (17). Place output housing on work bench. Do not lift output housing (26) by holding the rotating flange

(17).