CLUTCH DISASSEMBLY PROCEDURES.

TB 1-1520-238-30-19

7. CLUTCH DISASSEMBLY PROCEDURES.

WARNING

Cleaning procedures shall be accomplished in a well-lighted, well

ventilated area with adequate safety and fire prevention equipment

readily available.

CAUTION

Protect ports, bores and passages of assemblies or components be-

tween maintenance procedures.

CAUTION

Use plastic caps or plugs to seal lubrication lines and passages. Do

not use cloth, tape or aluminum caps/plugs.

CAUTION

Maintain hardware integrity. Do not interchange clutch detail hard-

ware with other clutch assemblies.

CAUTION

Provide proper coverings or supports to protect shafts, splines and

projecting parts from damage. If tapping is required to separate

parts, use a cellulose-tipped hammer or a fiber or rawhide mallet. If

clamping is necessary, clamp parts in vices that have micrata jaws or

equivalent.

CAUTION

Ensure plastic caps remain installed on both sides of the splined out-

put adapter to preclude contamination of roller bearing (20).

CAUTION

Heat discoloration of metal surfaces is acceptable except where

noted. Scale that could come loose and damage the clutch shall be

removed.

NOTE

Cleaning procedures for individual parts shall be consistent with good shop

practices and the following procedures. Correct cleaning for all parts is im-

portant to the successful operation of the clutch assembly.